1/2.9" Sony ExmoreR + STARVIS CMOS
Horizontal Resolution More than 700 TVL
Wide Dynamic Range
Contrast Enhacement
2D+3D Digital Noise Reduction
Auto Digital Noise Reduction
Privacy Mask(Max 16 zones)
Motion Detection
Day & Night
Smart IR Control
Defog
Imaging Device: | 1/2.9" CMOS (Sony ExmoreR STARVIS) 2.2M pixels |
Scanning System: | Progressive |
Total Pixels: | 2000(H) x 1241(V) |
Effective Pixels: | 1984(H) x 1105(V) |
Resolution: |
700 TVL |
Output Mode: |
HD-SDI,EX-SDI: 1080p30,720p60 Analog: NTSC,PAL (without WDR) |
S/N Ratio: | More than 50dB (AGC OFF) |
Light Control: | ELC / ALC |
Light Level: | 0 ∼ 20 Steps |
Electronic Shutter: | Auto/Manual (1/30(25) - 1/60000 ) / FLICKER |
SENS-UP: | OFF / x2 ∼ x32 |
AGC: | 0 ∼ 20 Steps |
White Balance: | Auto / Push / Manual |
BLC: | OFF / HLC / BLC / WDR |
Day & Night: | Auto / Color / BW / Ext High / Ext Low / Ext CDS |
Night Burst: | OFF / ON |
Smart IR: | OFF / ON (0 ∼ 20 Steps) |
IR LED: | Active High / Low (option) |
DNR: | OFF / ON / Auto (Low / Middle / High / V-High) |
Sharpness: | 0 ∼ 10 Steps |
Color Gain: | 0 ∼ 20 Steps |
Freeze: | OFF / ON |
Reverse: | OFF / H-REV / V-REV / HV-REV |
D-Zoom: | OFF / Auto / Manual (1.0x ∼ 8.0x) |
DWDR: | OFF / Low / Middle / High |
GAMMA: | 0.45 / 0.5 / 0.55 / 0.6 / 0.65 |
Defog: | OFF / ON (Auto / Manual) |
Black Level: | Auto / Full / Comp / User |
Pattern Generator: | OFF / ON |
Communication Connector: | Option |
CAM ID: | 0 ∼ 255 |
Baudrate: | 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 |
Protocol: | PELCO-D / PELCO-P / VISCA |
Language: | English / Chinese / Chinese2 / Korean / Japanese |
MOTION: | OFF / ON (4 Zone) |
PRIVACY: | OFF / ON (16 Zone) |
SHADING: | OFF / ON |
Display: | CAM ID , Zoom Mag , Camera Title |
Focus Adj: | OFF / ON |
Defect Det: | Support |
Reset: | Factory / User / User Save |
Power: | DC12V ± 10% |
Power Consumption: | Max. 1.2W (100mA) |
Operating Temperature: | -10°C ∼ +50°C |
Storage Temperature: | -20°C ∼ +60°C |
Dimension: | 32mm x 32mm |
Lens Mount: | D Mount |
Weight: | 16g(within Holder) |